Dear Ladies and Getlemen,

I found your website and I would be interested in an offer of MIM-parts.

I´m not sure if this inquiry fits to your technology concerning invest-price and part price.

Please offer the mold-price and the serial-production of the following part.

Bush for countersunk head

annual need:                    175.000 pcs +-15% for about 7 years

material:                             similar to C1010 (steel) or a non-corrosive steel without the coating described below.         

coating:                               Zinc/nickel alloy coating with limited layer thickness

                                               phosphated with organic coating (cathodic electrocoating), deep black

                                               zinc/nickel coating 6-12µ

                                               Organic coating (cathodic electrocoating) 6-12µ

                                               Total paint coat thickness 12-18µ

                                               The coating media used as well as the coatings must not contain any Cr(VI) compounds.

                                               The large surface area contact points at the suspension points that are typical for rack galvanized

goods are not permissible. Individual, barely perceptible micro-contact points that do not adversely

affect the corrosion resistance in particular are permissible.

The coating procedures must follow one directly after the other (online procedure), so that interim

storage and/or transport times are significantly reduced (target value: a maximum of 48 h). With

proper mounting, the coating must not suffer any damage that would lead to impairment of function

and/or decrease of the specified corrosion protection.

Requirements:                 Salt Fogging Test - 720h Surface free from base metal corrosion (rust) and blister formation,

adhesion loss at the scribe

I´m looking forward to your assessment and price indication.

Kind regards,